YG diesel wood chipper can go deep into forest areas, highway slopes and other non-electrified areas, instantly turning diseased trees and pruned branches into safe and harmless wood chips, thus cutting off the pest transmission chain and endowing waste with new resource value.【WhatsApp/WeChat/Phone】+86 13837122632
How Mobile Wood Chippers Combat Pine Wilt Disease?
Fast on-site disposal to cut off transmission: The equipment can be directly towed to the infected wood felling site, eliminating the need for long-distance transportation of infected wood to fixed treatment points, which greatly reduces the risk of pest spread during transportation.
Thorough crushing to eliminate hidden dangers: The machine’s powerful knife roller (e.g., the YG-6145 model is equipped with a 500mm-diameter knife roller) can completely crush tree trunks and branches within 250mm in diameter into fine wood chips. This physical destruction can effectively kill pine sawyer larvae and nematodes in the trunk, fundamentally eliminating the source of infection.
Promote harmless utilization: The crushed wood chips can generate high temperature through subsequent composting and fermentation to further ensure pest inactivation, or be used as biomass fuel for energy utilization, achieving a safe closed loop.
What Are the Uses of Wood Chips Produced by a Wood Chipper for Branches?
Ecological mulching and soil improvement: Wood chips can be directly or decomposed to serve as landscaping mulch for seedling bases and flower beds, playing the roles of moisture retention, temperature preservation, weed suppression and soil structure improvement.
Supply of production raw materials: Qualified wood chips are high-quality industrial raw materials for manufacturing particleboard, high-density fiberboard and paper, directly creating economic benefits.
Biomass energy: Wood chips can be used as fuel for biomass power plants or boilers to replace fossil energy and realize carbon cycle.
Organic fertilizer substrate: Mixed with other materials for composting, high-quality organic fertilizer can be produced to feed agriculture and forestry.
Advantages: Relatively low operating cost, low noise and vibration, more suitable for fixed places with stable three-phase power supply, such as nurseries and wood processing factories.
Limitations: Fully dependent on power supply, with limited operating radius, unable to meet the needs of field mobile operations.
Diesel wood chipper (e.g., YG-6130/6145 models)
Advantages: Strong power and high independence. Relying on the diesel engine to provide high torque (e.g., 75KW engine), it can easily crush thick and hard wood. Equipped with tires and a tow bar, it can be transferred at any time, making it the preferred solution for outdoor complex scenarios such as forestry infected wood treatment, mountain orchard pruning and highway maintenance.
Considerations: The equipment purchase price is usually higher than that of the electric model, and diesel costs need to be taken into account. However, its irreplaceable mobility and environmental adaptability are far more valuable than the price difference.
wood chipper for branches
How to Reduce Costs with a Wood Chipper for Branches?
Cost reduction: Significantly lower transportation and disposal costs: Branches and infected wood can be reduced in volume by 80%-90% after crushing. This means that branches that originally required 10 transport trips can be transported in only 1-2 trips after crushing, directly saving more than 80% of transportation and landfill disposal costs.
Cost reduction: Save a lot of labor and time: Mechanized crushing is highly efficient (e.g., the YG-6145 has a capacity of 5 tons per hour). Compared with manual handling and loading, it can save a lot of labor costs and speed up the project progress.
Revenue increase: Create new sources of income: As mentioned above, the produced wood chips can be sold as mulch, fertilizer or industrial raw materials, turning the cost center into a potential profit point.
Common Problems and Maintenance Points for Operating a Diesel Wood Chipper in Winter
Diesel anti-freezing: Be sure to replace with anti-freezing diesel of suitable grade according to local temperature to prevent wax deposition and blockage of the fuel system. After work, fuel anti-freezing agent can be added.
Difficult start-up: Low temperature reduces battery efficiency. Ensure the battery is fully charged. If necessary, use glow plugs or auxiliary starting power supply. Use engine oil suitable for the current temperature.
Sluggish hydraulic system: Hydraulic oil becomes viscous at low temperatures. After starting, let the equipment run at low to medium speed without load for 5-10 minutes for preheating. Start feeding only after the hydraulic actions become flexible.
Blade and bearing maintenance: Before operation, check whether the blades have hidden cracks caused by brittleness at low temperatures. Ensure that the bearing grease is not frozen and remains effective for lubrication.
Choosing a reliable diesel wood chipper is not only buying an efficient processing tool, but also equipping your forestry prevention and control, garden maintenance or waste recycling business with a “mobile resource conversion plant”. It represents an advanced idea for addressing environmental challenges: solving problems on-site and turning waste into resources. If you are looking for a mobile wood chipper that can go deep into the site, withstand harsh environments and achieve high-efficiency output, our professional team is ready to provide you with the most suitable model selection and solutions.【WhatsApp/WeChat/Phone】+86 13837122632
hot-selling laser concrete screed machine Inaccurate concrete leveling is quietly eroding your project profits—followed by subsequent repairs, construction delays, and …
