Unlike traditional moving rollers that need external pulling force, electric equipment moving skates integrate electric drive motors, brake systems, PU drive wheels, and a wireless remote control system into one unit. The 48V lithium battery system enables cable-free operation, and the industrial remote controller supports remote control up to 50 meters away. For moving high-value equipment and precision positioning work, these battery powered machinery skates deliver smoother movement, more flexible steering, and safer single-person operation.
Electric equipment moving skates are battery-powered wheeled load platforms. They slide under heavy loads to move the goods horizontally to target positions. Each unit comes with its own drive motor, gearbox, battery, and control electronics. No external power cords or hydraulic hoses connected to pump stations are needed.
The working principle is simple: lift the load slightly (usually with hydraulic jacks), then slide the skates underneath. Place multiple units according to the load’s center of gravity and support points. One operator can control the whole set via a handheld remote.
The key difference from traditional pulling methods: conventional moving skates are passive rollers. They only move when pushed or pulled by winches, forklifts, or workers with crowbars. These electric skates generate pulling force on their own. This single change cuts most labor work, most rigging prep time, and most safety risks.
Why battery power matters on site: No trailing cables means you do not need to manage wires along the moving path. There is no risk of cables being crushed or caught, and travel distance is not limited by cable length. Battery powered machinery skates can run continuously for 2–5 hours depending on models, long enough for most single-equipment relocation shifts.
remote control machinery skates for workshop
electric equipment moving skates for heavy machinery relocation
Cut labor costs: One person can finish the whole moving job with a remote controller.
Improve operation safety: The operator stays away from the load and crushing hazard zones.
Precision positioning: Adjustable low speed suits installation and alignment for machine tools, molds, and precision equipment.
Protect workshop floors: PU drive wheels reduce damage to epoxy and concrete floors.
Handle tough working conditions: Work on slopes of 3–15 degrees and unpaved ground.
Pass narrow spaces easily: 360-degree in-place steering lets you adjust direction without reversing.
For factories and construction sites relocating CNC machines, injection molding machines, transformers, generators, or large steel structures, electric heavy machinery moving skates help shorten downtime and simplify complex relocation work.
YG Battery Powered Machinery Skates Key Features
Precise wireless control. Industrial-grade remote controller with 50-meter effective range. One operator works safely from a good viewing angle. It boosts safety and saves labor — one worker replaces a whole team.
Strong climbing performance for heavy loads. The full range covers load capacity from 60 tons up to over 100 tons. It handles 3–15 degree slopes and fits unpaved ground and complex sites.
Flexible 360° in-place steering. Independent wheel drive gives a zero turning radius. You adjust direction without reversing. This is why it works well in narrow workshops and tight aisles.
Modular synchronized operation. Multiple units support wireless sync linkage. Combine them freely based on load size. Extra-long, extra-wide, and irregular heavy objects can be moved smoothly as one coordinated set.
Brake fitted on all drive motors. Brake motors for all models (Brake 104 for 10T–30T; Brake 120 for 40T–60T), paired with flange-reinforced gearboxes. This is critical for holding position on slopes.
Luomengtai high-strength gears. All seven models use Luomengtai high-strength 3-module gears.
Q355 manganese steel body. Plate thickness increases by model: 10mm for 10T–20T, 12mm for 25T–30T, 16mm for 40T–60T. Structural thickness matches load instead of using one uniform size for all.
Imported PU drive wheels. High-hardness, fully imported PU with different specs by model: 80×120×4 for 10T, 90×135×4 for 20T–30T, 140×140×4 for 40T–50T, 140×140×8 for 60T. The 60T version uses 8 wheels instead of 4.
Dual-channel drivers matched by model. D2T80A for 10T–20T, D2T100A for 25T–30T, D2T200A for 40T–50T, D2T220A for 60T.
Lithium battery options. Ternary lithium available for all models; 20T–50T also support LFP. Capacity ranges from 48V 30AH (10T) to 48V 120AH (40T–60T).
Adjustable travel speed. 2–10 m/min across the whole range. Slow enough for precision positioning and fast enough for long-distance transport.
Application Scenarios for Electric Equipment Moving Skates
Factories & precision manufacturing
Perfect for relocating and installing heavy machine tools and injection machines without damaging equipment. Widely used for large precision parts transfer in aerospace and shipbuilding.
Warehousing & logistics hubs
Efficiently move heavy steel coils, molds, and large pallets to improve warehouse space usage. At ports, it supports fast connection and short-distance transfer for containers and bulk cargo.
Construction & energy projects
Adapt to tough construction sites and easily shift precast components and bridge steel structures. In power projects, safely position and move heavy equipment including transformers and generators.
Industry Matching Solutions
One main unit plus two auxiliary skates is the top choice for 90% of buyers
Standard setup (1 main + 2 auxiliary): For regular machine tools, molds, and medium-tonnage industrial equipment. Simple assembly and flexible steering; the most popular 3-point support configuration.
High-stability 4-point setup (2 main + 2 auxiliary): Suitable for high-center-of-gravity loads or jobs requiring high stability and even load distribution.
Side-shifting setup (3 / 4 linked main units): For extremely narrow passages requiring sideways movement. Multiple main skates sync wirelessly to realize lateral shifting.
Q: What is the max load of remote control machinery skates?
Single unit traction covers 10–60 tons. Linked multiple units can reach over 100 tons total capacity to transport extra-large heavy goods.
Q: Can multiple remote control machinery skates work together?
Yes. Multiple units connect by wireless sync linkage to carry extra-long, extra-wide, or irregular heavy loads, ideal for large machine tools, steel structures, and heavy electrical equipment.
Q: How long can it run continuously?
Continuous runtime is around 2–5 hours, depending on the model. Heavier loads, steeper slopes, rough ground, or higher travel speed will shorten actual working time.
Q: How to maintain it?
Daily checks focus on battery level, drive wheel wear, brake function, and remote signal. Clean dust and oil after use. For long-term storage, keep the battery charged and recharge regularly.
