Dust Control Cannon Successfully Exported to Portugal: A Dust Reduction Upgrade Case for a Lisbon Building Demolition Project

For building demolition, urban renewal, and material disposal projects in Portugal, dust control has become a key measure for contractors to keep construction on track and meet environmental regulations. This case focuses on a demolition client serving Lisbon and surrounding areas. By adopting our dust control cannon solution, the client solved common issues of traditional manual water sprinkling, including insufficient coverage, recurring flying dust, and heavy equipment maintenance workload. It also set up a more standardized dust suppression process for multiple subsequent construction sites.

Parameters of YG Best-Selling Dust Suppression Cannon

Client Background: Dust Management Challenges on the Lisbon Demolition Site

The client is a building demolition and construction waste disposal contractor based in the Lisbon metropolitan area of Portugal. It regularly takes on projects including old factory demolition, road renovation, concrete crushing, construction waste sorting and temporary stockyard management. Its work sites are often located in urban renewal zones or next to traffic routes, so dust can easily spread to nearby roads, residential areas and public spaces.

Fine dust particles are continuously generated during concrete crushing, loading, screening, and muck hauling. Especially under hot, dry, and windy summer conditions in Portugal, traditional water hose washing or manual sprinkling cannot easily reach high-level dust and large work zones. This leads to a common problem: the ground gets wet, but dust still floats in the air.

Local project owners and regulators have set stricter rules on construction dust, noise, and waste disposal. The client needed to cut visible dust on site and deliver stable, traceable environmental management measures to reduce complaints, work stoppages for rectification, and risks of fines. For this reason, the client started to look for dust suppression cannon equipment suitable for demolition sites, to capture airborne particles with a finer water mist.

Client Pain Points: Manual Sprinkling Cannot Handle Complex Site Conditions

Before purchase, the client mainly used water sprinklers together with manual hoses for dust control. This method works for road washing and local wetting, but has limited effect on high-rise dust from demolition, dust at crusher discharge points, and wind-blown dust at construction waste stockpiles.

Key problems raised by the client:

1. When rock breaker, excavator loading and screening run at the same time, dust sources are scattered, and manual sprinkling cannot keep up in time.
2. Water jets have large droplets that fall quickly and cannot effectively trap fine dust floating in the air.
3. Work zones change frequently, so the equipment needs flexible rotation, tilt adjustment, and remote control.
4. The coastal and summer construction environment in Portugal demands strong weather resistance, metal anti-corrosion performance, and stable continuous operation.
5. Water quality at construction sites is not always ideal. The client hoped the nozzle and water supply system could work with impurity-containing site water and shorten waiting time for spare parts.

Especially in dry, dusty environments with shifting winds, the client needed more than just “water spraying gear”. They required a water cannon dust suppression solution that covers major dust sources and allows fast adjustment of spray direction.

Why They Chose Us: Standing out Among Multiple Dust Control Cannon Suppliers

During procurement, the client compared many dust suppression cannon suppliers, focusing on spray range, atomization uniformity, build quality, control methods, spare parts support, and communication efficiency for export. After technical discussions and solution confirmation, the client selected our company for these main reasons:

1. Our fog cannons work with high-pressure water pumps paired with fine nozzles. High-pressure water passes through nozzles to form tiny droplets, which the fan sends to target zones. The water mist fully contacts, binds, and settles dust particles in the air.
2. Nozzles are made of stainless steel for regular construction dust control. For sites with poor water quality, we supply spare nozzles together with the machine for easy maintenance and replacement.
3. Equipment frames use galvanized pipes, wind barrel guards use cold-rolled steel plates, and fan blades use aluminum alloy. These materials improve structural stability and service life for outdoor construction.
4. Horizontal rotation and vertical tilt mechanisms adjust spray angles as dust sources shift, cutting time spent moving the whole machine repeatedly.
5. Remote control lets operators start, stop, and adjust the direction and tilt angle from a safer spot with less dust exposure, matching common operating habits on demolition sites.
6. Besides mines and demolition yards, the equipment also suits coal stockpiles, coal port terminals, stone processing plants, landfill deodorization, municipal sanitation, urban solid waste centers and large-scale disinfection and deodorization. It offers good adaptability for different projects.

The client particularly appreciated our focus on real working conditions, instead of simply chasing “longer spray range is better”. For this project, stable, even, and controllable fog cannon dust suppression performance mattered more than long-distance water spraying alone.

Product Configuration & Solution: YG-40 Dust Control Cannon Matches Demolition Working Radius

Considering the client’s demolition zone of roughly 25–35 meters, the need to cover crushing areas and temporary stockpiles, and on-site 3-phase industrial power supply, we recommended the YG-40 dust control cannon.

Configuration plan for YG-40:

Note: The parameter table only specifies the pump motor power of YG-20 as 1.5 kW. The pump power of YG-40 will be confirmed and configured according to the final water source, water pressure, nozzle quantity, and site conditions. So no fixed, unconfirmed commitment on this item is made in this case study.

For on-site layout, the client placed the machine upwind or crosswind between the crusher and construction waste stockpile, and adjusted spray angles based on wind direction. The 40-meter coverage reaches key work zones. Driven by the fan, fine mist forms a wide spray curtain to suppress floating dust generated during crushing, screening, and loading.

Compared with traditional heavy water flushing, this water cannon dust suppression solution delivers mist into dust diffusion zones, cuts wasteful ground watering, and raises coverage efficiency of a single machine over large work areas. For future expansion into port bulk material or waste hauling work, the YG-60 with a 60-meter spraying range is an alternative upgrade option. This model runs on 380V / 50Hz / 3-phase power, with an 11 kW fan motor and 2 × 1.5 kW steering motors.

Delivery, Installation and On-site Results

After factory inspection, the machine was packed per export standards and shipped to Portugal. During delivery, we supplied the client with basic operation guides, routine nozzle cleaning advice, water connection instructions, and remote control tutorials. The client’s field technicians finished power, water, and positioning connections following installation requirements. During the trial run, they tuned horizontal rotation and tilt angles according to on-site wind.

Key commissioning points included spray coverage, machine placement, even mist output from nozzles, and remote operation for different work stages. For unstable site water quality, the client used filtration and regular checks to maintain the water supply system. If disinfectant spraying is needed, a ceramic pump configuration should be used instead of standard dust suppression pumps.

Client feedback shows visible dust at crushing and unloading zones dropped greatly after deployment. Site supervisors can turn the machine on and off flexibly following work schedules. Below are sample figures from the client’s internal evaluation. Actual results are affected by material moisture, wind speed, work intensity, machine placement, and water supply:

1. With proper machine positioning and spray direction, floating visible dust at main work faces fell roughly 60%–75% compared with the old setup.
2. Fewer manual hose runs are needed. Dust control staffing per shift can drop from 2 workers to 1 inspector for support.
3. Atomized mist reduces unnecessary water use versus continuous heavy ground flushing. Exact water-saving ratios need to be recorded via site water meters and running hours.
4. Dust buildup on roads and vehicle surfaces around the site improved. The client can show clearer dust control measures to project owners and environmental inspectors.

This fog cannon dust suppression system does not replace all washing work. It works together with road cleaning, vehicle washing, hoarding fencing, and material covering to build a complete construction dust management system.

Client Testimonial: Dust Control Cannon Better Suited for European Demolition Sites

The client’s project manager commented: “We previously relied on manual hoses and water sprinklers for dust. But dust still spread easily during peak crushing and loading. After we started using this dust control cannon, mist covers major dust sources, and remote adjustment is convenient. Especially in dry and windy weather, it works far better than simple ground sprinkling. The supplier sent spare stainless steel nozzles and clear operation guidance, which helps a lot with our on-site maintenance. We see it as a practical dust suppression cannon solution.”

Contact YG

This Portugal client case proves that for high-dust scenarios including building demolition, construction waste treatment, mines, port bulk cargo and stockyards, equipment selection must assess working radius, wind direction, power supply, water quality, machine mobility and control demands together. A well-chosen dust control cannon not only boosts on-site dust suppression efficiency, but also helps project teams build more standardized, long-term environmental management routines.

Whether you need equipment for construction sites in Portugal, coal stockpiles, waste treatment centers, stone processing plants, or port terminals, we can provide dust suppression cannon selection advice and export packages based on site spray distance, dust sources, and power supply. Please get in touch with us.